Organic compounds that have a hydroxy group (-OH) are called alcohol. To the general public, alcohol refers to ethanol, and many people get intoxicated by drinking beverages with ethanol. However, in organic chemistry, we describe alcohol as including compounds with hydroxy groups.
There are so many compounds with alcohols that can be synthesized into a wide variety of compounds. Different products can be produced by changing the reagents used in the reaction.
The following synthetic reactions are the main alcohol reactions
- Reactions under basic conditions
- Reactions under acidic conditions
The reaction mechanisms are different, as each is a different synthetic reaction. However, it is necessary to understand the mechanism of each reaction because it is possible to synthesize a wide variety of compounds using alcohol.
Table of Contents
- 1 In the Oxidation Reaction, the Products are Different in the Primary, Secondary and Tertiary
- 2 Alcohol That Acts as a Base (Nucleophile) in Metal Sodium
- 3 Acid Catalyzed Substitution and Elimination Reactions
- 4 There Are Different Types of Alcohol Synthesis Reactions
In the Oxidation Reaction, the Products are Different in the Primary, Secondary and Tertiary
The first synthetic reaction to understand with alcohol is oxidation. Oxidation of alcohol allows us to synthesize aldehydes, carboxylic acids and ketones. This means that other functional groups can be synthesized from alcohol.
The type of functional group that can be synthesized depends on the environment of the substituents attached to the carbon. It also depends on what reagents are used.
The products are different depending on the primary, secondary, and tertiary of alcohol oxidation. They are as follows.
Depending on how the alkyl chains are bound to the carbon atoms, the compounds formed in the oxidation reaction differ. Note that tertiary alcohols are not oxidized. Alcohols are not always oxidized.
Oxidation by Chromic Acid and Hypochlorous Acid to Synthesize Carboxylic Acid and Ketones
When alcohol is oxidized, an oxidizing agent must be used. Chromic acid and hypochlorous acid are the most popular oxidizing agents. You can use either chromic acid or hypochlorous acid as the oxidizing agent to be utilized. These can be used to oxidize alcohol.
Note that hexavalent chromium is highly toxic, and care must be taken when treating the waste liquid after the synthetic reaction. As for hypochlorous acid, it is the main ingredient in chlorine bleach.
Chromic acid and hypochlorous acid can be used to obtain the following compounds
- Primary alcohols: carboxylic acid
- Secondary Alcohol: Ketone
Secondary alcohols can only synthesize ketones by oxidation. On the other hand, is it possible to obtain aldehydes from the oxidation of primary alcohols? In this regard, aldehydes cannot be obtained by oxidation by chromic acid or hypochlorous acid. This is because carboxylic acids are formed soon after the formation of aldehydes.
Therefore, the general oxidation of alcohol yields carboxylic acids or ketones.
Reaction Mechanism of Aldehyde Formation and Carboxylic Acid Synthesis: Jones Oxidation
Then, what reaction mechanism is used to synthesize carboxylic acids in the oxidation of alcohol? Since the synthesis mechanisms of aldehydes and carboxylic acids are more complex, if we can understand the mechanism of carboxylic acid formation, we will be able to understand how ketones are synthesized. Therefore, instead of ketones, we will describe the reaction mechanism to obtain carboxylic acids.
The synthetic reaction of oxidizing alcohols to obtain carboxylic acids and ketones is also called the name reaction. It is called Jones oxidation and utilizes chromic acids such as CrO3 and H2CrO4. It is a synthetic reaction in an aqueous solution, and aldehydes are synthesized by the following reaction mechanism.
The reaction mechanism for Jones oxidation is a bit more complex, with aldehydes being synthesized by oxidation of the compound by chromic acid in an aqueous solution. In the case of secondary alcohols, ketones are formed, and the reaction mechanism is the same.
So, what is the reaction mechanism used in Jones oxidation with chromic acid to synthesize primary alcohols to carboxylic acid?
In the presence of water, the aldehyde undergoes a hydration reaction with water. The result is the formation of geminal diols (or gem-diols). The reaction mechanism is as follows.
In any case, the presence of water causes the hydration reaction to proceed and the aldehyde is transformed into a compound with two hydroxy groups (gem-diol).
The geminal diols are then oxidized to carboxylic acids by reacting with chromic acid again.
Importantly, because of the presence of water in Jones oxidation, an aldehyde is formed and then hydrated to form -OH. The result is the synthesis of carboxylic acids.
Aldehyde Synthesis under Anhydrous Conditions by PCC and Swern Oxidation
Thus, carboxylic acids and ketones can be obtained by Jones oxidation with chromic acid. So, when oxidizing primary alcohols, can’t we stop them with the synthesis of aldehydes instead of advancing to carboxylic acids?
Depending on the method, it is possible to synthesize aldehydes by the oxidation of alcohols. The way to do it is to proceed with the oxidation reaction in an anhydrous condition.
As mentioned earlier, in Jones oxidation, the synthesis reaction proceeds under the presence of water. Because of the presence of water, the aldehyde is hydrated to form geminal diols (gem-diols), and the oxidation reaction proceeds to carboxylic acids. In other words, if water is not present, the aldehyde will not hydrate and carboxylic acid will not be formed.
PCC (pyridinium chlorochromate) is a synthetic reagent that enables the oxidation reaction under anhydrous conditions. The following is the structural formula of PCC.
When PCC (pyridinium chlorochromate) reacts with primary alcohol, the reaction mechanism is as follows.
After obtaining the aldehyde, the reaction stops. Since there is no water present, there is no oxidation from aldehyde to carboxylic acid.
-Synthesis by Swern oxidation
Swern oxidation is also used in the organic synthesis reactions to obtain aldehydes. One of the name reactions is Swern oxidation, which, like PCC, oxidizes primary alcohols under anhydrous conditions to obtain aldehydes.
By reacting at a low temperature, such as -78°C, Swern oxidation allows the synthetic reaction to proceed with fewer unwanted by-products. It is one of the most frequently used synthetic methods in organic chemistry.
In short, under anhydrous conditions, we can understand that aldehydes can be obtained by oxidizing primary alcohols in this way. In addition, by performing PCC or Swern oxidation on secondary alcohols, ketones can be obtained.
Alcohol That Acts as a Base (Nucleophile) in Metal Sodium
As explained so far, the final product obtained varies with the oxidizing agent used and the synthesis conditions. On the other hand, what happens in other organic synthesis reactions instead of the oxidation of alcohol?
In general, alcohol is known to be a neutral substance. Both methanol and ethanol are neutral. However, in organic chemistry, it is necessary to think in terms of the relationship between acids and bases. By coexisting with a strong base, alcohol can be used as a base (nucleophile).
The alcohol contains an oxygen atom and has a high degree of electro-negativity. Therefore, they are polarized within the molecule, and in the presence of a strong base, they release H+ and become alkoxide ions. In many cases, alkali metals are utilized to pull out the H+ bound to the alcohol.
The most common alkali metal is sodium (Na). By adding sodium hydride (NaH) as a reagent, the hydrogen (protons) in the alcohol is pulled out and ionized. Thus, a strong base (strong nucleophile) is formed as an alkoxide.
Nucleophilic substitution reactions (SN1 and SN2 reactions) are frequently used in organic synthesis with bases. As a nucleophilic agent, the alkoxide ion attacks other molecules to cause nucleophilic substitution reactions.
Nucleophilic substitution reactions with alcohols are important if you want to synthesize an ether.
Acid Catalyzed Substitution and Elimination Reactions
On the other hand, the OH of alcohol can also replace other substituents. In other words, let’s understand that the OH is left and replaced by other substituents.
Earlier we explained that utilizing the alcohol as a base can cause a nucleophilic substitution reaction. In this case, an SN1 or SN2 reaction will occur. The alkoxide ion will nucleophilic attack and replace the leaving group. Instead, the OH becomes the leaving group.
However, in its current state, OH does not become a leaving group. Therefore, an acid catalyst is used. By using a strong acid, hydrogen (proton) is bonded to an oxygen atom, and -OH becomes -OH2+. Since -OH2+ is an excellent leaving group, it can cause substitution or elimination reactions.
For example, by reacting an alcohol with hydrogen chloride (HCl), the hydroxy group is replaced by a chloro group.
In the case of primary alcohols, the reaction proceeds by the SN2 reaction. On the other hand, for secondary and tertiary alcohols, the reaction proceeds through the SN1 reaction. Either way, they are left by nucleophilic substitution reactions and replaced with halogens.
Various Methods of Halogenation
However, if HCl (hydrogen chloride) or HBr (hydrogen bromide) is just added to alcohol, the reaction often does not proceed. Therefore, halogenation is usually carried out with a reagent such as thionyl chloride (SOCl2) or phosphorus tribromide (PBr3).
Adding thionyl chloride (SOCl2) or phosphorus tribromide (PBr3) to the alcohol will cause the alcohol to halogenate. For example, when thionyl chloride is used, the reaction mechanism is as follows.
The addition of acid chloride allows the synthetic reaction to proceed by this reaction mechanism.
So why halogenate the alcohol? Halogens bonded to alkanes are excellent leavening groups and undergo a nucleophilic substitution reaction with alcohols or amines. Therefore, it is possible to make new bonds such as the following.
The synthesis reaction is rarely completed by halogenation alone by utilizing an acid catalyst. Subsequently, the reaction can be carried out again to obtain the desired compound.
In any case, understand that you can synthesize alkyl halides by halogenating them. You use the alkyl halide to proceed with the next synthetic reaction.
-Sulfonate Esters Are Often Used
In addition to the halogenation of alcohols as described above, sulfonate esterification of alcohols is also common. Sulfonate esters have the following structural formula.
Like halogens, sulfonate esters act as good leavening groups. Therefore, new bonds can be made by nucleophilic substitution reactions.
The reaction mechanism is the same as for alkyl halides. After synthesizing the sulfonate ester, a nucleophilic agent is added to the solution for the substitution reaction.
Important is the fact that alcohol can be converted to an excellent leaving group. Subsequently, by adding reagents, a substitution reaction can take place, allowing new compounds to be synthesized.
There Are Different Types of Alcohol Synthesis Reactions
Different functional groups have different properties and it is important to understand what kind of synthetic reactions are possible. Among them, alcohols have a certain number of main reactions.
Oxidation and nucleophilic substitution reactions are the main synthetic reactions for alcohols. For oxidation reactions, it is important to understand that the products will vary depending on the reagents used and the environment in which they are synthesized.
For nucleophilic substitution reactions, on the other hand, the nature of the reaction depends on whether it is a base condition or an acid condition. When combined with a strong base, the alcohol becomes an alkoxide ion and causes a nucleophilic substitution reaction. In contrast, in an acid-catalyzed environment, the hydroxy groups are replaced by other substituents through substitution reactions.
The synthesis of alcohols has these characteristics. Each reaction mechanism is different, but we should try to understand how alcohols react because they are all synthetic reactions that we use frequently.